A Thorough Guide To Applying Basement Paint
Adding some basement paint is an affordable way to spruce up that space that doesn't get the attention that it deserves. Whether your basement simply has plain concrete walls or if it has been previously finished, you may be pleasantly surprised at what an impressive difference a nice fresh coat of paint will make. Not to mention, painting your basement walls will help keep them protected from moisture so this simple project will maintain your home while making it look significantly better.
Before you can apply basement paint, you have to make sure that your walls are first prepared properly. If by chance the walls in your basement are made from drywall, you have a bit of extra work to do. However, if your walls are like most, they are probably made from concrete or stone so all you will need to do is make sure that they are well cleaned. Every bit of debris and dirt must be cleared away before you can apply your basement paint.
To make your life a little easier, you may want to just take a vacuum cleaner to them first before you wash them. This will grab the dust and cobwebs. If you have any kind of ground water seepage visible, this needs to be repaired and left to dry before you can start painting.
Don't think about skipping this step! You may think that you can get away with not priming your walls before you apply your basement paint but really, you will end up dealing with a headache later. Primer is really inexpensive and it will substantially improve the appearance and quality of your paint job. You are taking the time to give your basement a healthy face lift, there is nothing to be gained by skipping a step.
Offer a nice generous primer coat the same way that you would apply the paint. Make sure that this coat of primer is completely dry before you start painting.
Apply The Paint
To provide your walls with optimum protection, you should apply two to three coats of basement paint. This will also ensure that you obtain the maximum color shade quality.
Some people suggest using Muratic Acid to acid etch prior to priming your basement. However, unless you are a professional, you should really not attempt working with this toxic substance. If you want to perform acid etching on your basement, do yourself a favor and hire a professional.
It is also important to note that paint fumes are toxic. Always be sure that when you start priming or painting that you have proper ventilation. If you have windows in your basement, open them up. Otherwise, use a few fans to help circulate the air.
Before applying your basement paint, you may find that you need to waterproof a few areas. Below are some of the top-rated waterproofing materials to use in your basement.
- Epoxy Crack Filler – Just because you paint over a crack, does not make it stop being a crack! Rather than replacing an entire foundation wall, use an epoxy resin filler to repair the crack. Although this does not fix the root of your problem, it will stop water from seeping in.
- Liquid Rubber Paint – This will stop any water from seeping through your walls and then running to the floor. Using a paint roller or a brush, apply it the same way that you would typical wall paint.
- Urethane Sealing – Urethane will seal over a crack without extending well into the wall. The water is allowed into the wall where it gets filtered downward and travels back to the ground. Urethane is ideal in humid climates because it allows a slight flex in the wall, which keeps them from cracking. This is one of the best cost-effective, long-term techniques to repair water leaks.